FLIR G300a w/ 14.5° Lens
The FLIR G300 a thermal imaging camera lets you can monitor vital gas pipelines or installations 24/7. You will immediately see if a dangerous and costly gas leak appears. You do not have to rely anymore on periodic inspections. Monitoring is done from a safe distance without the need to send technicians into potentially dangerous areas.
FLIR G300 a imaging cameras can be easily integrated in housings with application specific requirements.
Cooled detector makes the smallest temperature differences visible
FLIR G300 a also contains a cooled Indium Antimonide (InSb) detector that produces thermal images of 320 x 240 pixels. Users that need a higher gas sensitivity can preferably choose the FLIR G300 a with its combination of low F-number and low gas sensitivity detects small leaks.
High sensitivity mode
The high sensitivity mode further enhances the sensitivity of the cameras so that the smallest gas leaks can be detected.
Easy to control
All models are easy to control from a safe distance. They can be fully controlled over Ethernet. They can easily be integrated in a TCP/ IP network.
The FLIR G300 a is available with 23 mm or 38 mm lens.
FLIR G300 a, detects the following gases:
Benzene, Ethanol, Ethylbenzene, Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, Xylene, Butane, Ethane, Methane, Propane, Ethylene and Propylene.