Shop By Category

Site Information

loading Loading... Please wait...
Need Assistance?   866-451-2257

Fluke 87V Industrial Multimeter

$429.99
NOTICE: To receive excellent discount consideration or high-volume pricing on FLUKE products call our team at (866) 451-2257 or request a quote here:

Get Quote

SKU:
2074974
Weight:
0.78 LBS
Shipping:
Calculated at checkout
Qty:

Fluke 87V Industrial True-RMS Multimeter with Temperature

Order Includes: Test leads, alligator clips, holster, batteries (installed), temperature probe, information packet

Features:

Designed to Identify Complex Signal Problems Fast

When productivity is on the line and you need to solve problems fast, the Fluke 87V delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V industrial multimeter, allows you to gain productivity by taking the guesswork out of drive system troubleshooting even in loud, high energy, and high altitude locations.

  • Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
  • Built-in thermometer allows temperature measurements without a separate thermometer
  • Peak Min/Max allows capture of intermittents as fast 250 µS
  • Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings
  • CAT III 1000V, CAT IV 600V safety rated
  • Designed and built in the U.S.A.
  • Lifetime warranty
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
  • True RMS AC voltage and current for accurate measurements on non linear signals
  • Selectable filter for accurate voltage and frequency measurements on motor drives
  • 0.05% DC accuracy
  • Measure up to 1000 VAC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Analog bargraph for fast changing or unstable signals

The Fluke 87V - Just One of Fluke's Trusted Tools

Fluke builds the most trusted tools in the world and that means more than just the Fluke 87V. If you work with HVAC equipment, need a small meter for small spaces or work in the electrical installer's and repairman's world, check out the full family of Fluke digital multimeters.

Specifications

FunctionsRange and resolutionBasic accuracy
DC voltage 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 0.05 %
AC voltage 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 0.7 % (true-rms)
DC current 600.0 μA, 6000 μA, 60.00 μA, 600.O mA, 6.000 A,
10.00 A
0.2 %
AC current 600.0 μA, 6000 μA, 60.00 μA, 600.O mA, 6.000 A,
10.00 A
1.0 % (true-rms)
Temperature (excluding probe) -200 °C to 1090 °C (-328 °F to 1994 °F) 1.0 %
Temperature probe -40 °C to 260 °C (-40 °F to 500 °F) 2.2 °C or 2 %
Resistance 600.0 Ω, 6.000 kΩ, 60.00 kΩ, 600.0 kΩ, 6.000 MΩ,
50.00 MΩ
0.2 %
Capacitance 10.00 nF, 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF,
9,999 μF
1.0 %
Frequency 199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz 0.005 %
Battery life 400 hours typical with backlight off
Dimensions (LxWxD)/Weight 201 mm x 98 mm x 52 mm (7.9 in x 3.8 in x 2 in)/355 g (22 oz)