Gas Detection Accessories

Honeywell Midas Sensor Cartridges Cartridges are required for all Midas transmitters sensors at time of purchase and for replacement. Several Midas cartridges can be configured via the transmitter to read a number of different gases based on a common...

H2S sensor for MP100 series: Measuring range: 100ppm Resolution: 0.1

CO sensor for MP100 series: Measuring range: 2000ppm Resolution: 1

PH3 sensor for MP100 series: Measuring range: 20ppm Resolution: 0.01

Stainless Steel Swivel Mounting Assembly for Fire Sentry FS24X, FS20X, SS4, SS2  flame detectors

Rae Systems Carbon monoxide (CO) Replacement Sensor Replacement Sensor for ToxiRAE Pro Electrochemical Toxic, MultiRAE Lite, MultiRAE, MultiRAE Pro, AreaRAE Pro, AreaRAE Plus and MultiRAE Gas Monitors.

Description Resource Information CX-6/CX-12 Nitrogen Dioxide NO2 Replacement SensorField replaceable Nitrogen Dioxide (NO2) sensor Key Features: Size: 2 x 2 x cm (approx.) Temperature Range: -22°F to 122°F (-30°C to...

Fluke i17XX-flex3000 iFlex Current Clamp 24 in The Fluke 17XX 24 inch iFlex® flexible current probes expand the measurement range of the Fluke 17XX Energy or Power Logger to 3000A AC while providing the ultimate measurement flexibility. The...

Fluke i17XX-flex6000 iFlex Current Clamp 36 in The Fluke 17XX 36 inch iFlex flexible current probes expand the measurement range of the Fluke 17XX Energy or Power Logger to 6000A AC while providing the ultimate measurement flexibility. The iFlex probes...

Description Resource Information Field replaceable Carbon Monoxide (CO) sensor for CX-6 and CX-12 (Please see detector manual for sensor replacement instructions) Used with CX-6 and CX-12 Key Features Size: 2 x 2 x cm (approx...

Description Resource Information The IntelliDoX system combines smart docking modules and device management software to provide automated instrument management for Honeywell BW Solo, Honeywell BW Ultra, BW MaxXTII, BW Clip Series, Honeywell...

AC-DC POWER SUPPLY. Used with 6 series, horn and strobe, CM-E1, GD-2B.  Features compact design up to 25.2 W continuous power DoE Level VI compliant no load power consumption < 0.075 W universal input voltage range over voltage,...

Description Resource Information Adapter Kit used to retrofit Macurco 2-gang type installations (CM-15, CM-15A, CM-16A, etc.) to CM-E1 single gang detectors. Key Features: 2 – 6-32 x 1/2” Machine Screws, 4 – 6-32 x...

Description Resource Information The Macurco WHK-1 is a weatherproof enclosure that provides means to protection-mount all Macurco 6-Series gas detectors in non-hazardous locations. By weatherproofing a gas detector, the unit is able to...

Description Resource Information The Macurco DMK-1 is an air tight enclosure that provides a means to mount any Macurco gas detector to an air duct. By duct mounting a Macurco gas detector it is able to monitor the air inside of the duct...