Macurco Controllers/Alarms

Macurco HS-SYNC Synchronization Module for use with multiple Macurco Horn & Strobe units.

The Macurco MRS-485 adapter is an accessory used to convert the 4-20mA analog signal from Macurco 6-Series type detectors to a digital signal for use with multipoint addressable systems. The MRS-485 accepts the 4-20mA output and is powered from the same...

The DVP-120B is a BACnet Control Panel providing automatic control to help maintain an acceptable environment in parking garages or other facilities. The DVP-120B can control up to 87 addressable gas detectors – ETL Listed. Key...

The DVP-120M exhaust fan controller provides automatic control to help maintain an acceptable environment in parking garages or other facilities. Using the Macurco MRS-485 Modbus adapter and 6-Series detectors, the DVP-120M can control up to 87...

The DVP-120 LADBS exhaust fan controller, in conjunction with Macurco™ gas transducers, provides automatic controls to help maintain an acceptable environment in parking garages or other facilities – ETL Listed, LADBS Approved. Key...

The DVP-120 exhaust fan controller, in conjunction with Macurco™ gas transducers, provides automatic controls to help maintain an acceptable environment in parking garages or other facilities – ETL Listed, LADBS Approved. Key...

Macurco RD-12 The Macurco RD-12 is a line voltage, dual relay Refrigerant (REF) detector, controller and transducer. The RD-12 has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to measure the...

Macurco RD-6 Refrigerant The Macurco RD-xx is a dual relay Refrigerant (REF) detector, controller, and transducer. The RD-xx has selectable 4-20 mA output, buzzer and digital display options. The RD-xx has a long-life solid-state sensor (expected...

Macurco OX-12 Oxygen O2 The Macurco OX-12 is a line voltage, dual relay oxygen (O2) detector, controller and transducer. The OX-12 utilizes an internal switching power supply that is capable of using line voltage between 100 and 240VAC and 50-60Hz.The...

Macurco OX-6 Oxygen O2 The Macurco OX-6 is a low voltage, dual relay oxygen (O2) detector, controller and transducer. The OX-6 has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to measure the...

Macurco TX-12-ND The Macurco TX-12-ND is a line voltage, dual relay Nitrogen Dioxide (NO2) detector, controller and transducer. The TX-12-ND utilizes an internal switching power supply that is capable of using line voltage between 100 and 240VAC and...

Macurco TX-6-ND The Macurco TX-6-ND is a low voltage, dual relay Toxic Gas (TX) detector, controller and transducer for Nitrogen Dioxide (NO2). The TX-6-ND has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection...

Macurco TX-12-HS The Macurco TX-12-HS is a line voltage, dual relay Hydrogen Sulfide (H2S) detector, controller and transducer. The TX-12-HS utilizes an internal switching power supply that is capable of using line voltage between 100 and 240VAC and...

Macurco TX-6-HS The Macurco TX-6-HS is a low voltage, dual relay Hydrogen Sulfide (H2S) detector, controller and transducer. The TX-6-HS has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to...

Macurco HD-11 The unit is designed to monitor levels of hydrogen gas in a room or a facility where hydrogen gas may be present, for example where forklifts, backup power supplies, or golf carts battery charging stations are present. It is a low...