Accessories

Honeywell Midas Sensor Cartridges Cartridges are required for all Midas transmitters sensors at time of purchase and for replacement. Several Midas cartridges can be configured via the transmitter to read a number of different gases based on a common...

Carbon Monoxide+Hydrogen Sulfide (CO+H2S) combo

Stainless Steel Swivel Mounting Assembly for Fire Sentry FS24X, FS20X, SS4, SS2  flame detectors

Description Resource Information Field replaceable Carbon Monoxide (CO) sensor for CX-6 and CX-12 (Please see detector manual for sensor replacement instructions) Used with CX-6 and CX-12 Key Features Size: 2 x 2 x cm (approx...

Description Resource Information The IntelliDoX system combines smart docking modules and device management software to provide automated instrument management for Honeywell BW Solo, Honeywell BW Ultra, BW MaxXTII, BW Clip Series, Honeywell...

AC-DC POWER SUPPLY. Used with 6 series, horn and strobe, CM-E1, GD-2B.  Features compact design up to 25.2 W continuous power DoE Level VI compliant no load power consumption < 0.075 W universal input voltage range over voltage,...

Description Resource Information Adapter Kit used to retrofit Macurco 2-gang type installations (CM-15, CM-15A, CM-16A, etc.) to CM-E1 single gang detectors. Key Features: 2 – 6-32 x 1/2” Machine Screws, 4 – 6-32 x...

Description Resource Information The Macurco WHK-1 is a weatherproof enclosure that provides means to protection-mount all Macurco 6-Series gas detectors in non-hazardous locations. By weatherproofing a gas detector, the unit is able to...

Description Resource Information The Macurco DMK-1 is an air tight enclosure that provides a means to mount any Macurco gas detector to an air duct. By duct mounting a Macurco gas detector it is able to monitor the air inside of the duct...

Description Resource Information Macurco OX Sensor OX-6 / OX-12 Oxygen O2 Replacement Sensor. Macurco Brochure(click here) 

Hydrogen Sulfide H2S Replacement Sensor to be used with TX-6-HS and TX-12-HS.

Description Resource Information Field replaceable Ammonia (NH3) sensor for TX-6-AM and TX-12-AM (Please see detector manual for sensor replacement instructions) Used with TX-6-AM and TX-12-AM Key Features Size: 2 x 2 x cm (approx...

Description Resource Information The TX-6-ND Low Voltage monitor provides automatic fan control to help maintain acceptable levels of Nitrogen Dioxide (NO2) in parking garages, warehouses, and other and controller and as an analog...

Calibration hood used to test or calibrate the GD-6 and GD-12.

The Macurco CM-E1-Harness is a wire harness with a white plug for CM-E1 Gas Detectors.