9am-5pm M-F

click to zoom in
  • Customer Success

    We know our products!

  • Technical Specialists

    Product and System Support

  • Added Value

    Guaranteed Fit

  • US Shipping

Honeywell Analytics

Honeywell Fire Sentry FS20X Flame Detector

$3,270.00 - $4,466.00
Request A Quote

Honeywell Fire Sentry FS20X Flame Detector

$3,270.00 - $4,466.00

Honeywell Fire Sentry FS20X Flame Detector

$3,270.00 - $4,466.00

Based on the foundation of the highly successful and reliable Fire Sentry SS4 detector, the Fire Sentry FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The Fire Sentry FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor.

The Fire Sentry FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors. 

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

The Fire Sentry FS20X detector, using advanced patented algorithms for signal processing and fire and flame analysis, is designed to alarm to all types of fires in all industrial environmental conditions. If the detector’s UV signal is degraded due to heavy smoke or a contaminated lens, the Fire Sentry FS20X’s patented* WideBand IR, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.


•  Patented* WideBand IR Infrared combined with Ultraviolet
•  Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.)
   heptane fire
•  Patented* Electronic Frequency Analysis
•  Visible sensor for optimum false alarm rejection
•  Selectable detection sensitivities
•  Solar blind 90° full 100% cone-of-vision
•  Dual microprocessors for reliable performance
•  Real-time clock for accurate time dating of events
•  FirePic - Up to 6 pre-fire event data storage
•  Event log - Up to 200 events with date and time stamp
•  Built-in RS-485 ModBus communication
•  Built-in non-isolated 4-20 mA analog output (sink or source)
•  Alarm, Fault and Fire Verification relays
•  Automatic Optical Path and Electronic self-test
•  Wide operating temperature range
•  Patented* Electronics Module for component protection with 
   plug-in terminations for easy field installation
•  Two 25 mm conduit entries or two ¾” NPT
•  Low power consumption
•  High RFI and EMI immunity
•  FM approved
•  Ex d ATEX approved


•  Detects hydrocarbon and non-hydrocarbon fuel fires in all 
   environmental conditions
•  Arc welding immunity
•  False alarm rejection for environmental conditions
•  Minimal maintenance for trouble-free operation
•  PC software and interface module (FSIM) for fault diagnostics real-time
   graphs (RTGs), and downloading of FirePics and event log
•  Suitable for a wide variety of applications


•  Refineries and oil production facilities
•  Off-Shore platforms
•  Turbine/Compressor enclosures
•  Acetylene processing and storage
•  Oil and Gas pipelines and pumping stations
•  LNG/LPG loading and unloading facilities
•  Natural Gas and CNG plants
•  Ethanol, Methanol, and IPA production and storage
•  Crude oil and gasoline storage and tank farms
•  Aircraft hangars
•  Hydrogen plants and storage
•  Paint and solvent storage
•  Chemical production, storage, and loading facilities
•  Power plants
•  Silane gas storage

Check out our other store:
Free US Shipping $199+
Excellent Service
Icon Hot
Icon Hot